TESTO 6381 Instruction Manual page 143

7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Channel
Limit value
Visual alarm display
Alarm delay
Explanation
Selection of the channel that is to
be monitored.
Values for the limits of the unit
selected in Unit/analog
decimal places.
When changing the phys. unit, the
relay limit values are set to the
default values.
Checkbox is activated: Upon the
appearance of the selected alarm,
the background lighting of the
display and the corresponding
measurement value flashes.
The desired alarm delay for the
alarms of the min/max control and
the visual alarm is entered in the
input field (0 to 3600 seconds
possible).
The alarm delay has no effect on
the collective alarms.
output; 4
143