TESTO 6381 Instruction Manual page 76

4 Transmitter
1. In the Measuring Mode press SET, select
with  or  and confirm selection with SET.
2. Confirm
3. Select
4. Scroll between the warning and error messages recorded so far
using  or  and return to
5. Select
6. Scroll between the status messages recorded so far using  or
 and return to
7. Continue to
ON: Measurements are shown on the display in Measuring
Mode.
OFF: No messages shown on display.
8. Select
9. Return to
10.Continue to
Measuring Mode with ESC.
76
Using the P2A software (see volume 2, 7. Parameterizing,
adjusting and analyzing software (P2A software)) you can
predefine whether messages are to be shown in the
display.
Confirm message
Last messages
with  or  and confirm with SET.
Information
Information
Display of message
ON or OFF with  or  and confirm selection with SET.
Main Menu Message
Main Menu Ident
An overview of the messages can be found in 4.5. Status,
warning and error messages.
1 Operating hours at the
time of message
2 Message code (see 4.5.
Status, warning and error
messages).
3 Message text
4 Message number
(example: "4/7" refers to
the fourth of seven
messages)
5 Number of messages
present (example: "4/7"
refers to the fourth of
seven messages)
using SET.
with  or  and confirm with SET.
Last messages
using ESC.
with  or .
with ESC.
with  or  or return to
Main Menu Message
using ESC.