7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Self-adjustment
Activate self-
adjustment for the
testo 6615 probe
Self-adjustment
every
[Start self
adjustment]
Explanation
Setting the self-adjustment.
•
Checkbox is activated: The self-
adjustment is performed in the set cycle.
•
Checkbox is not activated: The self-
adjustment is not performed.
Setting the cycletime in which the self-
adjustment is to be performed.
In order to receive reliable readings
during the calibration or equalization
period of the probe, testo
recommends the shortest possible
cycle time.
A longer cycle time can be set in
continuous operation.
Start self adjustment at a defined time
outside the cycle time.
151