Connecting/Removing The Probe To/From The Transmitter; Maintenance And Cleaning; Replacing Filters/Protection Caps; Replacing The Filter/Protection Caps For Testo 6611 Wall Version - TESTO 6381 Instruction Manual

6 testo 6610 probes
6.3.2. Connecting/removing the probe to/from the
transmitter
• Insert probe connector into socket of testo 6381 until it
engages. The testo 6381 identifies which probe is connected.
• To remove the probe, the lock release button on the probe must
be pressed so that this can be removed.
6.4.

Maintenance and cleaning

6.4.1.

Replacing filters/protection caps

6.4.1.1.

Replacing the filter/protection caps for testo 6611 wall version

1. Unscrew defective filter/protection cap (2) from probe shaft (1).
2. Screw new filter/protection cap onto probe shaft.
130
Do not damage the sensors when exchanging the filter/the
protection cap and do not touch their surfaces!
Screw on protection cap by hand, i.e. do not tighten it using
a tool.