You can edit settings for:
•
Display
•
Language
•
Code
•
Units
◦
Absolute pressure
◦
Area
◦
Temperature
•
Standard data
◦
Absolute pressure
◦
Temperature
•
Pressure process data
◦
Absolute pressure
◦
Humidity
◦
Temperature
◦
Cross-section
◦
Pitot tube factor
◦
Correction factor
•
Humidity process data
◦
H2O2 percentage by weight
◦
Humidity process pressure
Editing display settings
You can set the brightness and contrast of the display.
1. Select
Display Settings
SET.
2. Select
Backlight
selection with SET.
One of the following parameters can now be selected using or
, after which the selection must be confirmed with SET:
•
Backlight
The display illumination is changed.
Edit/select parameter with or , confirm with
entry with
ESC
seen during input).
•
Contrast
The brightness difference between the display background and
the displayed values is changed.
Edit/select parameter with or , confirm with
entry with
ESC
seen during input).
with or and confirm selection with
with or and confirm
or
Contrast
(the effect of the change in parameter can be
(the effect of the change in parameter can be
4 Transmitter
SET
or cancel
SET
or cancel
71