7 Parameterizing, adjusting and analyzing software (P2A software)
7.2.
First steps
7.2.1.
Installing the software/driver
7.2.1.1.
Installing P2A software
1. You can download the software under the following link:
https://www.testo.com/download-center. If the installation
program does not start automatically: > Open download folder
and start P2A.exe.
2. Follow the instructions of the installation wizard.
3. Click on [Finish] to complete the software installation.
7.2.1.2.
Installing USB driver
1. You can download the USB driver under the following link:
https://www.testo.com/download-center
the installation program does not start automatically: > Open
download folder and start USBDriver.exe.
2. Follow the instructions of the installation wizard.
3. Click on [Finish] to complete the software installation.
7.2.1.3.
P2A software upgrade
1. Download and store P2A software upgrade from
www.testo.com/download-center
2. Select folder into which the downloaded Zip file was stored, and
unzip the file.
3. Start file
4. Follow instructions from installation assistant.
7.2.2.
Starting the software
7.2.2.1.
Starting the program
> Click on
10) |
Adminstrator rights are required for installation.
Without the input of a licence key, the software will run only
as a demo version (time limit 30 days).
P2A
upgrade.exe.
All Programs
Testo
|
P2A-
Software.
In Windows 7 the window
opened when starting the software the first time.
> Click on Accept.
(Testo USB driver) If
(requires registration).
®
(Windows
7, Windows
User account control
®
®
8, Windows
is
135