TESTO 6381 Instruction Manual page 42

4 Transmitter
• Alarm messages (testo 6381)
• Service hour counter (testo 6381 and probe)
as well as the reading and writing of the:
• Adjustment data (testo 6381)
• Configuration data of analog outputs (testo 6381)
• Configuration data of relays (testo 6381)
• User settings (testo 6381)
XML codes (download)
The table of xml-codes is available for download
www.testo.com/download-center
URL
/data/getserialnumber
/data/getidentification
/data/getversion
/data/getfirmwaredate
/data/getonlinevalue
/data/getviewchannels
/data/getstatus
/data/getlaststatusmessa
ge
/config/gethourscount
/config/getusersettings
/config/getcalibration
42
Description
Read off serial number of
connected transmitter
Read off type of
connected transmitter/
probe
Read off firmware version
of connected transmitter
Read off firmware date of
connected transmitter
Read off online values of
connected transmitter
Read off view channels of
connected transmitter
Read off status of
connected transmitter
Read off last status
message of connected
transmitter
Read off service hour
counter of transmitter or
probe
Read off settings of
transmitter
Read off adjustment data
of transmitter
(requires registration).
Parameter
param=0 (for transmitter)
param=1 (for probe)
param=0 (adjustment set 1)
param=1 (adjustment set 2)
param=2 (adjustment set 3)
Answer (see
Appendix)
serialnumber.xml
identification.xml
version.xml
firmwaredate.xml
onlinevalue.xml
viewchannels.xml
status.xml
laststatusmessage.xml
hourscount.xml
usersettings.xml
calibration.xml