4 Transmitter
7. Continue to main menu
Measuring Mode with ESC.
4.4.6.10.
Editing Reset main menu
You can reset the factory settings for the following:
•
Instrument
•
Sensor/probe
•
Min./max. values
1. In the Measuring Mode press SET, select
with or and confirm selection with SET.
-
Reset Device
2. Select the setting to be reset using or and confirm
selection with SET.
-
Reset Completed
3. Return to the reset setting with
Menu Reset
4. Continue to
Measuring Mode with ESC.
4.5.
Status, warning and error messages
To achieve optimum operational reliability (machine availability),
the transmitter shows the following via the user menu or the P2A
software
•
Status messages
•
Warning messages
•
Error messages
The status and warning messages for the respective testo 6610
probes connected to the transmitter can be evaluated via the P2A
software.
All messages are stored in the transmitter with an operating hours
stamp. Use the user menu (see 4.4.6.7. Editing Message main
menu) or the P2A software (see volume 2, 7.3.5. Transmitter
history) to view the message history.
In the transmitter, the last 60 status messages and the last 120
error and warning messages are stored in a ring memory. There is
no limit in the P2A software.
80
Resetting to the factory settings means resetting to the
order specification, i.e. the specific condition at the time of
supply to the customer.
to factory settings is displayed.
is displayed.
with ESC.
Main Menu Channel 1
with or or return to
Reset
ESC
or
SET
with or or return to
Main Menu Reset
and return to
Main