6 testo 6610 probes
6.1.2.
Design of the probe
The probes of the testo 6610 family are made up of the following
components (included in delivery):
•
Probe connector
•
Probe shaft with protection cap and sensors (% RH and °C or
°F)
•
Mounting bracket (for testo 6612 duct version)
•
Probe cable (testo 6612 to 6617 duct and cable versions), bend
radius minimum Ø 50 mm.
1 Probe connector
2 Probe length
3 Probe
4 Protection cap, sensor underneath
5 Probe
6.1.3.
Accessories
The following accessories are available for the probes from the
testo 6610 family:
•
Filters and protection caps ().
•
Calibration certificate in accordance with ISO and DAkkS (see
8.2. Accessories and spare parts).
100