Testing Switch Output Relays 1 To 4 - TESTO 6381 Instruction Manual

7 Parameterizing, adjusting and analyzing software (P2A software)
- The analog output and the relay return to Measuring Mode
again.
7.3.3.4.

Testing switch output relays 1 to 4

✓ The required instrument file is marked.
1. Click on
- The
dialogue is opened with the
2. Mark
Field/button
[Activate relay n]
[Deactivate relay
n]
3. Click on
- The analog output returns to Measuring Mode again.
156
[Test/analyze
Properties of <Instrument type> <Serial number>
Relay tests and test the values.
Explanation
Test the relay function (see volume 1,
4.4.6.6. Editing Main Menu Analysis).
Close contact.
A warning informs that the value is being
transmitted to a connected PLC, external
display, etc. in the event of existing cabling.
Open contact.
A warning informs that the value is being
transmitted to a connected PLC, external
display, etc. in the event of existing cabling.
[OK] or [Cancel]
transmitter].
Test/analyze transmitter
to close the dialogue.
register.