Switching On; Calling Up A Function; Entering Values - TESTO 330-1G Instruction Manual

1.800.561.8187 1.800.561.8187
5.2.3.

Switching on

> press [ ] .
- The start screen is displayed (duration: about 5 s).
- If the voltage supply was interrupted for a longer period: The
menu Date / Time is opened.
- The pressure sensors are set to zero.
- There is a device error: The
Measurements
- The menu
5.2.4.

Calling up a function

1. Select function: [▲], [▼].
- The chosen function appears in a frame.
2. Confirm selection: [OK].
- The chosen function is opened.
5.2.5.

Entering values

Some functions require values (numbers, units, characters) to be
entered. Depending on the function that is chosen, the values are
entered via either a list field or an input editor.
List field
1. Select the value to be changed (numerical value, unit): [▲],
[▼], [◄], [►]
2. Press [Edit]
3. Set value: [▲], [▼], [◄],
function).
4. Confirm the entry: [OK].
5. Repeat steps 1 and 4 as required.
6. Save the entry: [Finished].
www. www.
Error Diagnosis
is displayed.
(depending on the selected function).
.
[►]
(depending on the selected
.com .com
5 First steps
is displayed.
31
information@itm.com information@itm.com