Calling Up Main Menu Ident; Editing Main Menu Adjust - TESTO 6381 Instruction Manual

4.4.6.8.

Calling up Main Menu Ident

The serial numbers of the transmitter and probe can be read off.
1. In the Measuring Mode press SET, select
with  or  and confirm selection with SET.
- The type, firmware version, build number and serial number of
the transmitter are displayed.
2. Return to
firmware release, build number and serial number of the probe
with  or  and then return to
3. Continue to
Measuring Mode with ESC.
4.4.6.9.

Editing Main Menu Adjust

A reference value can be entered for both relative humidity (RH)
and temperature (°C/°F) for the 1-point adjustment. Please refer to
the description in 4.3.4.8. 1-point adjustment (offset -
humidity/temperature).
Reference values for pressure can be entered for the n-point
adjustment. Please refer to the 4.3.4.11. description in n-point
adjustment (pressure).
In addition, the analog outputs can be adjusted. Also see 4.3.4.10.
Analog output adjustment, for instructions on how to do this.
This information is required when servicing.
Main Menu Ident
Main Menu Adjust
1 Instrument or
2 Build number
3 Firmware
4 Serial number
Main Menu Ident
with ESC or read off the type,
Main Menu Ident
with  or  or return to
4 Transmitter
probe type
version
with  or .
77