4 Transmitter
•
Backlight 24h on
Select
Off: The display light switches off automatically if no button was
pressed for 10 seconds.
On: The display light is activated
3. Return to
continue to Language.
Selecting language
You can select the language for the plain text line in the display.
> Press SET, select required language with or , confirm
selection with
Editing code settings
You can set the access code (password).
1. Select
2. Scroll one digit to the right using and increase value of digit
by 1 using . Confirm with
3. Return to
Change
Select unit (Change unit)
This setting affects the displayed unit of all readings.
1. Select
SET
2. Select
cancel with ESC.
3. Select the required variable (absolute pressure/temperature)
with or , confirm selection with
4. Select the required unit with or , confirm selection with
or cancel with ESC.
5 Return to
data
Editing standard data
Setting individual values for the standard data to calculate the
volumetric flow rate.
72
using or and confirm with SET.
On
or
Off
Display Settings
SET
and return to language.
Only choose a language that you can understand well.
If a code other than "0000" (factory setting) is set, the
transmitter can only be operated once this code has been
entered via the menu.
with or and confirm selection with SET.
Code
Code
with
ESC
parameters.
Change parameters
or cancel with ESC.
with or , confirm selection with
Change unit
Change unit
with or .
with
ESC
and use or to
SET
or abort entry with ESC.
and use or to continue to
with or , confirm selection with
SET
or cancel with ESC.
with
ESC
and continue to
SET
or
SET
Standard