TESTO 6381 Instruction Manual page 166

7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Serial number
Operating hour
probe
Unit
Offset from
Offset to
Target value
Reading
Difference
Error/status
messages
The table is shown only for error and status messages that were
generated in the transmitter and were transferred and saved there
via the connection to the P2A software.
166
Explanation
Serial number of the transmitter to which the
probe was connected at the time of the
adjustment.
Operating hour of the probe at which the
change at the instrument was performed.
Unit during the adjustment.
1-point adjustment: Value before the
adjustment.
1-point adjustment: Value after the
adjustment.
2-point adjustment: Reference value.
2-point adjustment: Value before the
adjustment.
2-point adjustment: Difference determined by
instrument between target value and reading.
Error/status messages: The error/status
messages assigned to the probe.