TESTO 6381 Instruction Manual page 146

7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Correction factor
Absolute pressure
Temperature
[Reset]
Button
Ethernet
146
Explanation
The correction factor enables an adjustment
to the flow profile in the duct.
The entered correction factor is included in
the Pitot tube calculation.
The entered value and the selected unit are
included in the calculation of the standard
volumetric flow rate.
The entered value and the selected unit are
included in the calculation of the standard
volumetric flow rate.
Button for resetting the standard data to the
factory settings.
Explanation
Networking the transmitters via Ethernet.
For a multitude of applications, measurement
data can be simultaneously recorded,
documented and visualized.