TESTO 6381 Instruction Manual page 118

6 testo 6610 probes
At a glance
WARNING
In the event of overpressures, the probe may become a
projectile.
> Mount the probe pressure-tight (see pressure resistance under
Technical data)
Application
• Monitoring and regulating trace humidity processes
(compressed air with adsorption or membrane driers and plastic
granulate driers)
• Used when spatial separation of transmitter and probe is
required.
118
Also see volume 1, 4.3.4.13. Self adjustment of
testo 6615 trace humidity probe, for the functional
principle of the testo 6615.
Only use testo 6615 with sintered PTFE protection cap (art.
no. 0554 0759) or sintered stainless steel protection cap
(art. no. 0554 0647).
During the self-adjustment phase the signal values of the
analog outputs remain on hold, meaning they are frozen for
the duration.
1 Connector
2 Key
3 Probe cable
4 Probe shaft
5 Protection cap
(including: humidity
and temperature
sensor)