Status Messages - TESTO 6381 Instruction Manual

4.5.1.

Status messages

Status messages show the current operating status of the testo
6381.
Message
02506
01D19
00300
00301
00500
0052F
02518
00503
02503
00530
00307
00117
02104
02101
Display
Sensor
initialization
Service plug
New limit value
Scaling changed
Transmitter reset
Reset Min/Max
Probe reset
Reset device to
fact
Reset probe to
fact
Change solenoid
valve
User Setting
Change
Adjustment DeltaP An n-point adjustment was
Analog adjustment An analog adjustment has been
1-point adjustment A 1-point adjustment is performed.
Description
Message appears while the
transmitter is starting up. If the
message disappears, the
transmitter is ready for operation.
The Mini-DIN socket is connected
to: the USB adapter for P2A
software, the adjustment adapter
or the service plug (is not
recorded/no number)
The limit value has been changed
or shifted
The scaling has been changed
The transmitter was reset to the
factory settings and is restarted.
Resets all saved Min/Max values
for all channels
Probe reset: The probe performs a
reset
A factory reset of the transmitter
was performed
A factory reset of the probe was
performed
The solenoid valve should be
changed
User Setting Change: General
settings were changed for the
transmitter.
performed.
made
4 Transmitter
81