TESTO 6381 Instruction Manual page 149

7 Parameterizing, adjusting and analyzing software (P2A software)
#
Field
Display
Continuous display
lighting
Display lighting
when button is
pressed
(10 seconds)
Display brightness
(0 to 9)
Display contrast
(0 to 9)
Display of the error
messages
Display language
New password
Explanation
Setting the display functions (if a display is
available on the transmitter).
Display lighting is permanently switched on.
When a particular button on the instrument is
pressed, the display lights up for 10 seconds.
Setting the brightness between 0 and 9:
0 = dark
9 = light
Setting the contrast between 0 and 9:
0 = low contrast
9 = high contrast
Selection of whether the error messages
should be shown in the display.
Selection of the language.
The password consists of four numbers,
each of which must be between 1 and 9.
If the password protection is not to be used,
the numerical code "0000" must be entered.
149