7 Parameterizing, adjusting and analyzing software (P2A software)
2. Click on
3. Select the file which is to be modified.
4. Click on
-
The parameters are transmitted to the file.
5. Connect and select corresponding instrument.
6. Click on
7. Confirm confirmation request.
-
Parameter data are transferred to the instrument.
7.3.2.6.
Deleting instrument/parameter file
Instrument/parameter files can be deleted from the file list.
1. Click on the file that is to be deleted with the right mouse button.
2. Select the command
-
The instrument or parameter file is deleted from the list.
7.3.3.
Analyzing/testing the transmitter
In this section, you can test the outputs of the connected
instrument, read off the limit values and reset the parameters to the
factory settings.
The function is only available for instrument files.
7.3.3.1.
Analyzing/testing the instrument
✓ The required instrument file is marked.
1. Click on
-
The
dialogue is opened with the
2. Perform action:
Action
Carrying out factory
reset
Testing analog
output
Edit > Copy
in the menu bar.
Edit > Paste
You can also use the common keyboard shortcuts for
copying (CTRL+C) and pasting (CTRL+V).
Parameters can also be transmitted using drag & drop,
where you drag the icon of the parameter file onto the icon
of the target instrument file.
[Change
parameterization].
Delete
[Test/analyze
Properties of <Instrument type> <Serial number>
Explanation
Reset the unit, limit value and hysteresis
parameters to factory settings (see below).
Test channel 1/optional 2/3 (see 7.3.3.3.
Testing analog output).
in the menu bar.
in the context menu.
transmitter].
Test/analyze transmitter
register.
153