Calling Up The Function; Entering Values - TESTO 340 Instruction Manual

20
information@ITM.com
E.4.2 Calling up the function
Functions which cannot be selected because the required sensor/probe is not
connected are shown in grey type.
1 Select function: , .
- The selected function is shown with a grey background.
2 Confi rm selection: .
OK
- The selected function is opened.
E.4.3 Entering values
Some functions require values (numbers, units, characters) to be entered. Depending
on the function that is selected, the values are entered via either a list fi eld or an input
editor.
List fi eld
Input editor
www.
1 Select the value to be changed (number, unit):
, .
2 Adjust the value: , .
3 Repeat steps 1 and 2 as required.
4 Confi rm the input: OK .
5 Save the input: OK Save input
1 Select value (character):
2 Accept the value: OK .
Options:
Switch between uppercase/lowercase letters:
(not always available).
A <=> a
Delete character: .
<=
To position the cursor in the text: Select the text
input fi eld: , and position the cursor:
, .
To delete character in front of the cursor:
Del .
3 Repeat steps 1 and 2 as required.
4 Save the input: OK Save input
Testo-Direct
OK .

, , , .
OK .

1.800.561.8187
.ca