7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Operating hours /
date/time
User
Comments
Selection of adjustment histories:
adjustments
Serial no. Probes
Probe operating
hour
User
Reference value
Unit
164
Explanation
Operating hour/time stamp at which the
change at the instrument was performed.
Name with which the user is logged into the
operating system.
"Transmitter" entry if the change was
performed at the instrument.
Type of parameter change, e.g. "Unit of
channel 1 from Pa to hPa".
/
Analog adjustments
Serial number of the probe.
Operating hour of the probe at which the
change at the instrument was performed.
Name with which the user is logged into the
operating system.
"Transmitter" entry if the change was
performed at the instrument.
If no changes were performed, no value is
displayed.
Unit during the adjustment.
1-point adjustments
/
n-point
adjustments.
/
2-point