TESTO 6381 Instruction Manual page 165

7 Parameterizing, adjusting and analyzing software (P2A software)
Field
Reading
Offset from
Offset to
Offset
Pressure
specification
Channel
Specification
Multimeter
Offset
Selection of probe adjustment histories:
point adjustments
Explanation
1-point adjustment: If no changes were
performed, no value is displayed.
1-point adjustment: Value before the
adjustment.
1-point adjustment: Value after the
adjustment.
2-point adjustment: Difference between
target and actual value reported by
instrument.
n-point adjustment: Reference value set at
the pressure sensor.
Analog adjustment: Channel 1 to n.
Analog adjustment: Actual value.
Analog adjustment: Reference value set at
the multimeter.
Analog adjustment: Deviation at time of
adjustment.
/ Error/status messages.
1-point adjustments / 2-
165