7 Parameterizing, adjusting and analyzing software (P2A software)
7.3.2.2.
Creating a new instrument file
It is possible to create an instrument file without restarting the P2A
software.
✓
Transmitter must be connected.
1.
Click on
-
Connection to the transmitter is established.
7.3.2.3.
Saving parameters
Parameters can be saved in new parameter files.
1. Mark instrument/parameter file.
2. Click on
3. Select storage location and enter the file name.
4. Click on [Save].
-
The new parameter file is shown in the file list.
Only the parameters are saved from an instrument file; the history
data are not adopted.
7.3.2.4.
Opening the parameter file
All parameter files stored in the standard directory path are
automatically displayed in the file list when the software is started.
You can also open parameter files that are stored in other
directories.
1. C lick on
2. Select the storage location and click on the requisite file.
3. Click on [Open].
-
The selected file is opened. This can be changed and saved
(see 7.3.2. Editing instrument/parameter file).
7.3.2.5.
Copying and pasting parameters
The parameters of a parameter file can be transmitted to an
instrument file or another parameter file from the same instrument
type.
1. Select file from which parameters are to be copied.
152
File > New connection
File > Save as
The original name (Instrument type, Serial number) is
suggested with the current date/time as standard, e.g.
"testo 6381 01234578 061120 1403.cfp".
For a standard installation, the files are saved under
"C:\Documents and Settings\All Users\Shared
Documents\P2A Software". The path can differ depending
on the version of the operating system.
File > Open
in the menu bar.
in the menu bar.
in the menu bar.