6 testo 6610 probes
◦
◦
•
Temperature
◦
* Refer to the charts below for the correlation between
Reproducibility
•
Better than ±0.2 % RH
Sensor
Response time without protective filter: t 90 max. 15 sec.
Probe dimensions
•
Diameter of probe shaft: 12 mm
•
E = 55 mm
•
L = 200 mm
•
L – A = 165 mm
•
A, see 6.2.1.4. Table Protection caps
Measuring accuracy of testo 6611 wall probe
Humidity error, absolute |±% RH| as a factor of process humidity
(% RH)
106
0.02 % RH/K, dependent upon the process temperature
(with a deviation of 25 °C/+77 °F)
0.02 % RH/K, dependent upon the electronics temperature
(with a deviation of 25 °C/+77 °F)
±0.15 °C (0.27 °F) with slope PT1000 class AA
temperature and accuracy.