7 Parameterizing, adjusting and analyzing software (P2A software)
-
The program window is opened (see 7.3.1. User interface).
7.2.2.2.
Establishing a connection with the instrument
Multiple instruments can be attached, however only one connection
is active at all times.
✓ USB driver is installed (see 7.2.1.2. Installing USB driver).
1. Start the P2A software.
2. Connect adapter (supplied with the P2A software) to the service
interface of the instrument (see volume 1, 4.2.4. Service
interface).
3. Connect instrument/adapter to the PC via the USB interface.
-
The instrument file of the attached instrument is shown in the
file list.
7.2.2.3.
Activating the connection with the instrument
> Click on the desired instrument file.
-
The selected file is marked in colour and the connection with
the instrument is activated.
If a connection with the instrument is established when the program
is started, the corresponding instrument file is marked
automatically.
136
The instrument works with limited functionality, if it is only
supplied via the service plug. Some settings, which can be
parameterized in the P2A software, will only be executed
by the instrument, after it has been connected to the
electric power supply.