4.3.4.3.
LED status displays
Characteristic
Colour
Status display for
Status: off
Status: lights up
Status: flashes
4.3.4.4.
testo 6381 as Saveris subscriber
Setting the IP address
✓ Upper part of housing must be removed.
✓ Network cable must be connected to the Saveris base and to
the Ethernet module.
✓ Service plug must be inserted.
The IP address of the transmitter can either be set via the P2A
software (transmitter accessories) or via the configuration menu of
testo Saveris
1. Set the IP address with the P2A software (see volume 2, 7.3.
Using the software) or with the testo Saveris
(see instruction manual).
2. Disconnect service plug.
3. Disconnect the Ethernet module from the voltage supply.
4. Close instrument (see 4.3.3.7. Closing the instrument).
Using Saveris
> Start Saveris software (see instruction manual Measurement
data monitoring with testo Saveris)
LED 1
green
Voltage supply
No voltage supply
Voltage supply present LAN connection
TM
(testo Saveris
Ensure that the Saveris software is not already open, for
example in multi-user operation under Windows
multiple clients are installed in a network, make sure that no
simultaneous changes are made to the system
configuration by the clients during simultaneous operation
of the clients.
LED 2
green
LAN connection
No LAN connection
present
Data transfer
TM
Ethernet Wizard).
4 Transmitter
TM
Ethernet Wizard
®
Vista. If
39