Rear Wheel Twinning - Belarus 2022.6 Operator's Manual

ATTENTION: AFTER BOLT TIGHTENING MAKE SURE THE BUTT ENDS OF
UPPER AND LOWER BUSHINGS OVERHAND ONE IN RELATION TO THE OTHER
FOR NOT MORE THAN 1...2 MM!
Tire standard
size
580/70R42
ATTENTION: WHEN SHIPPED FROM THE WORKS, REAR WHEELS ARE
MOUNTED ONTO THE WHEEL TRACK ACCORDING TO DIAGRAM 1 (FIGURE 3.2.5)!
Note – To get information on the rules of rear wheel track setting on tires
650/65R42 (alternative configuration), address your dealer!

3.2.10 Rear wheel twinning

With an aim to improve gripping properties of the tractor when coupled with heavy
agricultural implements on soil with low bearing capacity, rear wheel twinning with use of
spacers is provided.
To get information on the rules of rear wheel twinning and operating restrictions for
the tractors with rear wheels twinned, contact your dealer!
DIAGRAM 1
Figure 3.2.5 – Rear wheel track setting
Table 3.2.3 – Rear wheel track setting
Diagram No.
(figure 3.2.5)
1
2
DIAGRAM 2
Track dimension
«К», mm
1800...2010
2230...2500
87
2022.6-0000010 OM
The setting size from
the butt end of the
bushing hub group to
the semiaxle butt end
«L», mm
105...0
202...67