Table of Contents
Advertisement
2.21.3 Rear screen opening
To open the rear screen, turn handle 1 (figure 2.21.3) to the left (as viewed along tractor
movement) and holding handgrip 2, push rear screen 3 until the screen is fixed in the open posi-
tion.
To close the rear screen, pull handgrip 2 until screen 3 is fixed in a closed position.
2.21.4 Cab hatch opening
Installation of two hatch variants for roof upper part is possible on tractors "BELARUS-
2022.6":
- hatch with a detent;
- hatch with a handle.
To open the hatch with the detent, pull board 2 (figure 2.19.4) down, move the detent 3 for-
ward as viewed along tractor movement, push board 2 up until hatch 1 is fixed in an open position.
To close hatch 1, pull board 2 down until the hatch is fixed in the closed position.
.
To open the hatch with the handle, move handle 2 (figure 2.19.5) down and push it up.
Then fix hatch 1 in an open position, pressing handle 2 to the right as viewed along tractor move-
ment.
To close the hatch, turn handle 2 to the position "not fixed", pressing it to the left as viewed
along tractor movement. Pull handle 2 down, and then turn it to the right as viewed along tractor
movement until the hatch is fixed in a closed position.
2.21.5 Cab emergency exits
The cab has the following emergency exits:
- doors – left and right;
- rear window;
- side window – right and left.
1 – handle; 2 –handgrip; 3 – rear screen.
Figure 2.21.3 – Rear screen opening
1 – hatch; 2 – board; 3 – detent.
Figure 2.19.4 – Opening of hatch with the detent
а) hatch closed
1 – hatch; 2 – handle.
Figure 2.19.5 – Opening of hatch with the handle
b) hatch opened
66
2022.6-0000010 OM
Advertisement
Table of Contents
Troubleshooting
