Coupling Clevis Ku2000/329Nb33 And Coupling Clevis Ku5410/329-33 - Belarus 2022.6 Operator's Manual

4.4.7 Coupling clevis KU2000/329NB33 and coupling clevis KU5410/329-33

Figure 4.4.6 – Diagram of mounting variants for coupling clevises KU2000/329NB33 and KU5410/329-33
Table 4.4.6 – Basic parameters and coupling dimensions of coupling clevis KU2000/329NB33
Standard size (configuration)
1 Mounting location
2 Design features
3 Function
4 Drawbar hitch yoke dimensions, mm:
а) connecting pin diameter
b) yoke position
drive
c) distance between the rear PTO butt end
and the connecting pin axis
5 Towing device for coupling to DH:
а) type
b) vertical load in the hitch point, kN, not
more than
c) turning angle of the machine towing de-
vice in horizontal plane, degrees, at least
d) protective device type
e) connection point of the protective device
on the tractor
е) relative calculated value of axial forces,
kN, not more than
______________________________________
____________________________________
1)
Recommended.
1)
for machines with rear PTO
Coupling clevis KU2000/329NB33
Rear lifting device
Towing yoke – rotating, located at the
lifting device, with the possibility of
height adjustment
To couple towed agricultural trailed and
semi-trailed machines
wheels including the type of tractor trail-
ers and semi-trailers
Lower, as shown in figure 4.4.6
Rigid, with a towing eye
Chain or safety rope
Lifting device openings
116
2022.6-0000010 OM
with running
37
170
20
±65
70.1