Belarus 2022.6 Operator's Manual page 108

IT IS FORBIDDEN TO OPERATE FLL WITH LOGGING BLADES AND FOR JACK-
ING OF TRACTOR FRONT ELEMENT!
Front lift linkage is a three-point lift linkage of category 2 according to ISO 730 and
LL-2 according to GOST 10677. The diagram of FLL of configuration LL-2 is shown in fig-
ure 4.3.10. The main parameters of FLL are shown in table 4.3.2.
Table 4.3.2 – Main parameters and coupling dimensions of FLL
Standard size (configuration) of the device
1 Category
2 Design features
3 Assignment
4 Lower links
5 Lower links length, mm
6 Free front hinge joints width for upper
(lower) link, mm:
7 Hinge pin diameter of the upper link, mm
8 Pivot pin bore diameter of lower links, mm
9 Distance between the PTO butt end and
suspension axis, mm
10 Column height
11 Suspension axis length along the shoul-
1)
ders , mm
12 Lifting power of the device, kN
а) on the suspension axis;
b) at overhang of 610 mm from the sus-
pension axis
__________________________________________________________________________________________________
1)
The dimension refers to the coupled implement.
2)
It is forbidden to overload FLL with loads exceeding the tire load norm spec-
ified in table 3.2.2.
Figure 4.3.10 – FLL diagram
1)
, mm
2)
:
PTO
area
Category 2
The device consists of the upper link
and the lower links unit. Free ends of
the links are pivotally joined with the
implement connecting elements while
coupling.
For connection (mounting) and cou-
pling of agricultural mounted and
semi-mounted implements
Links unit with fast-coupling devices and
changeable hinge joints
108
2022.6-0000010 OM
LL-2
775
51 (45)
25
28.7
637
610
825
30
25