Coupling Balls Ki8329Nb33 And Kb8329Nb33 - Belarus 2022.6 Operator's Manual

4.4.9 Coupling balls KI8329NB33 and KB8329NB33

Figure 4.4.11 – Diagram of mounting variants for coupling balls KI8329NB33 and
KB8329NB33
Table 4.4.9 – Basic parameters and coupling dimensions of the coupling ball
KI8329NB33
Standard size (configuration)
1 Mounting location
2 Design features
3 Function
4 DH yoke dimensions, mm:
а) connecting ball diameter
b) ball height
c) jaw depth
d) position of the coupling ball
chines with rear PTO drive
5 Towing device for coupling to DH:
а) type
b) vertical load in the hitch point, kN
c) turning angle of the machine towing de-
vice in horizontal plane, degrees, at least
d) protective device type
е) relative calculated value of axial forces,
kN, not more than
___________________________________
___________________________________
_____________________________
1)
Recommended.
Coupling ball KI8329NB33
Rear lifting device
Towing ball Ø80, located on the lifting
device, with the possibility of height ad-
justment
To connect and couple agricultural
trailed and semi-trailed machines with
running wheels, including the type of
tractor trailers and semi-trailers
1)
for ma-
Rigid, with a coupling semi-sphere
120
2022.6-0000010 OM
80
87
65
Lower position
20
±60
Chain or safety rope
70.1