Rear Wheel Twinning - Belarus 1523.5 Operator's Manual

ATTENTION: AFTER BOLT TIGHTENING MAKE SURE THE BUTT ENDS OF UPPER
AND LOWER BUSHINGS OVERHAND ONE IN RELATION TO THE OTHER FOR NOT
MORE THAN 1...2 MM!
Tire standard
size
520/70R38
ATTENTION: WHEN SHIPPED FROM THE WORKS, REAR WHEELS ARE MOUNTED
ONTO THE WHEEL TRACK ACCORDING TO DIAGRAM 1 (FIGURE 3.2.5)!
Note – To get information on the rules of rear wheel track setting on tires 18.4R38 (alterna-
tive configuration), address your dealer!

3.2.10 Rear wheel twinning

With an aim to improve gripping properties of the tractor when coupled with heavy agricul-
tural implements on soil with low bearing capacity, rear wheel twinning with use of spacers
is provided.
To get information on the rules of rear wheel twinning and operating restrictions for
the tractors with rear wheels twinned, contact your dealer!
DIAGRAM 1
Figure 3.2.5 – Rear wheel track setting
Figure 3.4 – Rear wheel track setting
Diagram No. Track dimension
(figure 3.2.5) «К», mm
1 1600...1916
2 1946...2445
DIAGRAM 2
The setting size from
the butt end of the
bushing hub group to
the semiaxle butt end
«L», mm
160...0
250...0
85
1523.5-0000010 OM