Drawbar Hitch Dh -1 (Crossbeam) - Belarus 2022.6 Operator's Manual

4.4.6 Drawbar hitch DH -1 (crossbeam)

Figure 4.4.5 – Installation diagram of DH -1 (crossbeam)
Table 4.4.5 – Basic parameters and coupling dimensions of DH -1 (crossbeam)
Standard size (configuration)
1 Mounting location
2 Design features
3 Assignment
4 Distance between the PTO butt end and the
connecting pin axis, mm
5 Diameter of crossbeam openings for the con-
necting pin, mm
6 Vertical load on DH in hitch point, kN, not
more than
7 Protective device type
8 Connection point of the protective device on
the tractor
____________________________________________________________________
______________________________________
1)
Implement accessory.
Lower link, right
Lower link, left
115
DH -1 (crossbeam)
On the RLL suspension axis
Draw crossbeam on the RLL sus-
pension axis
For connection and coupling of
trailed, semi-trailed
mounted implements equipped with
towing yokes
668
32,5
3,5
Safety chain (rope)
Lifting device openings
2022.6-0000010 OM
and semi-
1)