Fuses For Engine Electronic Control System - Belarus 2022.6 Operator's Manual

2.20.4 Fuses for engine electronic control system

The installation place of the fuse for the EECS constant supply (at any position of
the AB switch) with rated value of 60A is shown in fig. 2.20.7.
To get an access to the rest of the EECS cutout fuses, turn off screw 3 (figure
2.20.15) on cap 2 of side console 1 and open the cap. The EECS block fuse is fixed to the
element of the cab housing.
1 – side console; 2 – cap; 3 – screw; 4 – EECS fuse block.
The EECS fuses (with SCR produced by a company ROSSKATavto) are shown in
figure 2.20.16.
1 – fuse block; 2 – power fuse of the engine electronic control box, with rated value 30A;
3 - power fuse of information display and power supply circuit after instruments activation
(terminal 15) with rated value of 7.5A; 4 – power fuse of diagnostic equipment with rated
value of 7.5 A; 5 – power fuse of supply module of SCR system and Nox sensors with rat-
ed value 20A.
Figure 2.20.15 – Location of EECS fuses
Figure 2.20.16 – EECS fuses
64
2022.6-0000010 OM