Belarus 2022.6 Operator's Manual page 124

Table.4.5.1 – Tractor "BELARUS-2022.6" hydraulic drive specifications
Parameter designation
1 Paired hydraulic outlets
2 Oil pipe of free drain into the tank
3 Oil consumption through hydraulic outlets,
l/min, not more than
4 Nominal minimum diameter of the oil pipe-
line, mm:
- oil pressure pipeline
- oil drain pipeline
- free drain
5 Hydraulic system rated operating pressure,
MPa
6 Operating pressure of the safety valve, MPa
7 Permissible hydraulic liquid extraction from
the tank, l, not more than
8 Permissible hydrostatic power take-off
(GSPTO) kW, not more than
9 Coupling thread of fast-coupling joint
sleeves, mm:
- oil pressure pipeline and oil drain pipeline
- free-drain oil pipeline
________________________________________________________________________________________________________________________________
1)
At standard engine rpm
ATTENTION: INSTALLATION OF ADDITIONAL ELEMENTS AND CHANGE OF
HYDRAULIC LIFT LINKAGE PIPELINES ROUTE IS ALLOWED ONLY AFTER CONSUL-
TATION WITH THE PLANT OR THE DEALER!
Note – The arrangement of the HLL hydraulic outlets and the diagram of their con-
nection to the external consumers are given in section 2 "Controls and instruments".
Parameter value (characteristic)
Side
-
-
124
2022.6-0000010 OM
Rear
Three pairs
One item
1)
Up to 53
16,0
25,0
25,0
16,0
20
-2
10,0
15,0
М20×1,5
М24×1,5