Drawbar Hitch Dh-2R ("Python") - Belarus 2022.6 Operator's Manual

4.4.4 Drawbar hitch DH-2R ("python")

Figure 4.4.3 – Installation variant diagram of DH -2R ("python")
Table 4.4.3 – Basic parameters and coupling dimensions of DH -2R ("python")
Standard size (configuration)
1. Mounting location
2. Design features
3. Assignment
4. Distance between the PTO butt end and the
connecting pin axis, mm
5. Connecting pin diameter, mm
6. Vertical load on DH in hitch point, kN, not more
than
7. Protective device type
8. Connection point of the protective device on the
tractor
9. Relative calculated value of axial forces, kN, not
more than
____________________________________________________________________________________________________________
1)
Implement accessory.
ATTENTION: IT IS FORBIDDEN TO PUT THE DEVICE TO THE EXTREME LOW-
ER POSITION, WHERE IT OVERHANGS THE DH SUPPORTING BRACKET END!
Rear lifting device
Cantilever fitted connection pin, verti-
For coupling of semi-trailed imple-
ments and implements of tractors
semi-trailers types having hitch clev-
Safety chain (rope)
Lifting device openings
113
2022.6-0000010 OM
DH -2R (python)
cally adjustable
ises
108
40
20
1)
70.1