Belarus 2022.6 Operator's Manual page 149

Table of Contents

Advertisement

End of table 5.3.1
Opera-
Operation description
tion No
6)
64
Change oil in the FPTO reduction unit
65
Change brake liquid in the clutch control drive
66
Change brake liquid in the brake control drive
5) 6)
67
Lubricate the sleeves of FLL lever pin
5)
68
Change grease in steering joints and rinse the
steering joints elements
69
Check /adjust the pneumatic system pressure
regulator
70
Check / tighten tension bolts of cylinder heads
71
Change the main filter cartridge of the air cleaner
72
Check / tighten tractor external threaded joints
73
Rinse the engine cooling system and replace the
cooling liquid in the engine cooling system
74
Rinse the engine breathers
75
Change filter cartridge of the cab ventilation and
heating systems
76
Change filter cartridge of the fine fuel filter
77
Change filter cartridge of the coarse fuel filter
78
Change the filter-drier of the air-conditioning
system
79
Carry out complex maintenance service of system
"COMMON RAIL"
Adjust the valve adjusting operating pressure in
80
the hydraulic system of transmission, located the
gearbox centrifuge
81
Carry out maintenance service of the engine air
cleaner
________________________________________________________________________
1)
The operation is performed when the tractor RLL is equipped with lower links with grip-
per tools.
2)
The operation shall be carried out once during the first maintenance service on a shift
basis (in every 8-10 hours of operation), carried out by the customer, and then every 125
hours of tractor operation.
3)
Control and if necessary, bringing tire internal pressure to the norm shall be carried out
each time when one mode of the tractor operation is changed to another operation mode,
and when the implements and tools coupled with the tractor are changed.
4)
AB check and maintenance shall be carried out once every 3 months and not less.
5)
When using grease MS-1000 TU 0254-003-45540231-99 the operation shall be carried
out with lesser intervals, according to table 5.8.1.
6)
The operation is performed when the tractor is equipped with FPTO and FLL against or-
der.
7)
The first and second change shall be carried out in 500 hours of tractor operation. Then
the change shall be carried out every 1000 hours of operation at the same time with oil
change.
8-10 125 250 500 1000
Every 600 hours of operation or
Every 600 hours of operation or
Every 800 hours of operation or
Every 3000 hours of operation or
Depending on oil pressure deviance
in the transmission hydraulic system
Depending on dirtiness
149
2022.6-0000010 OM
Periodicity, h
2000
X
X
X
X
X
X
X
X
X
X
X
X
once a year
once a year
once a year
once a year

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents