Safety Requirements For Preservation; Tractor Towing - Belarus 2022.6 Operator's Manual

7.8 Safety requirements for preservation

The preservation procedure includes surface preparation, coating with preservation
materials, paper marking and cutting, packing and shall be carried out only by persons of
the age, subjected to medical examination, properly instructed on labor and fire safety, and
receiving primary instructions on the working place. Preservation premises and sections
shall be separated from other production premises and equipped with plenum-exhaust
ventilation. Materials used for preservation are combustible substances with flash tem-
perature from 170 to 270
and have quality certificate.
The supplied conservation materials shall bear labels with material description. Per-
form preservation operations in special clothes and footwear and use individual protection
means. When performing preservation operations, observe personal hygiene rules, dry
clean special clothes in time, do not wash them in emulsions, solvents, kerosine. By the
degree of impact on human health, preservation materials are classified as of moderate
hazard, so use recommended individual protection means while handling materials.
With prolonged exposure to skin of preservation oils, greases and liquids, skin may
be injured. White spirit vapors in small concentrations act as a weak drug, large concentra-
tion may result in poisoning. Anticorrosion paper contains corrosion inhibitors causing irri-
tation and inflammation of skin, mucous of nose and eyes. Before starting work, it is re-
quired to put on cotton overalls, robe or an apron, prepare individual protection means de-
pending on work conditions and toxicity of substances used. Grease hands with protection
paste (cream) and put on cotton and rubber gloves. Before starting work, safe conditions
of which are not known, demand for safety instructions training.

8. TRACTOR TOWING

Tractor towing with HSC pump out of order is allowed at a speed of not more than
10 km/h for a distance of 5 km. Before starting tractor towing, do the following:
- set the GB range and gear shifting levers to a "Neutral" position;
- set the handle for RPTO switching from independent to synchronous drive to a
"Neutral" position.
In order to connect a towing rope on tractors with FLL (additional configuration),
there is a towing shackle located on the FLL bracket!
In case the tractor is towed without FLL (basic configuration), the towing rope shall
be fastened to the towing shackle located on the spacer plate with weights.
THE TOWING SHACKLE SHALL NOT BE USED TO LIFT THE TRACTOR!
ATTENTION: DURING TRACTOR TOWING, IT IS REQUIRED TO OBSERVE
TRAFFIC REGULATIONS!
o
C, and shall comply with state standards, technical specifications
223
2022.6-0000010 OM