Belarus 2022.6 Operator's Manual page 14

End of table 1.1
Parameter
(specification) designation
19 Hydraulic system:
а) pump displacement
rated speed, l/min, at least
b) safety valve operating pressure, МPа
c) nominal volume factor, at least
20 Operating equipment:
а) rear power take-off shaft:
b) front power take-off shaft:
c) rear lift linkage:
1) load-lifting capacity of rear lift linkage on
the suspension axle, kg, at least
2) rear lift linkage lifting time from lower-
most to uppermost position with test load
on the suspension axle, s, at least
d) drawbar hitch:
_____________________________________________________________________
________________________________________
1)
Engine parameters, not specified in table 1.2.1, shall comply with 260 S4 – 0000100
OM document.
2)
For referential use.
3)
When operating in a traction driven mode with implements on front and rear lift link-
ages and limiting speed to 15 km/h.
4)
To be specified depending on configuration.
5)
With ballast mounted.
under crankshaft
14
Parameter value for tractor
"BELARUS -2022.6"
53
20
-2
0,7
In subsection 3.2.7 "PTO use"
In subsection 3.2.7 "PTO use"
6500
5
In section 4 "Coupling of implements"
2022.6-0000010 OM