Dolby Encoder Automatic Program Configuration Selection; Dolby-E Encoder Video Sync Source Select; Dolby-E Output Line Phase Adjust; Configuring The Metadata - evertz 7721AE8-DEE-HD Manual

7700 MultiFrame Manual
7721AE8-DEE-HD HD-SDI/SD-SDI Audio Embedder with Dolby Encoder

6.10.1.1. Dolby Encoder Automatic Program Configuration Selection

Dolby Encoder
DE_A
DEAP
5.1+2
5.1
5.1+2x1
4x2
3x2
8x1
6x1

6.10.1.2. Dolby-E Encoder Video Sync Source Select

Dolby Encoder
DE_A
DEAS
Output Video
Reference

6.10.1.3. Dolby-E Output Line Phase Adjust

Dolby Encoder
DE_A
DEAL
-262 to 262
0

6.11. CONFIGURING THE METADATA

The Metadata menu is used to configure the parameters related to the Dolby Metadata VANC embedding
and external I/O. The chart below shows the items available in the Metadata menu. Sections 6.11.1 to
6.11.2 provide detailed information about each of the menu items.
MD_A Metadata Controls
DB9C DB-9 Configuration
Page-34
This control selects the program configuration for the
automatic operating mode of the Dolby-E encoder.
The control allows the selection of the most commonly
51+2
used program configurations and enables the module to
_5.1
generate a default metadata BSI in the Dolby-E stream.
5111
2222
This control is only effective when "AUTO" is selected for
_222
the metadata source.
_8x1
_6x1
With this control you can select the source of sync for the
Dolby Encoder.
Select VREF to use the video input reference as the
VOUT
source of sync.
VREF
Select VOUT to use the video output as the source of
sync.
This control adjusts the output line phase of the Dolby-E
encoder with respect to the input video sync source.
Adjustments are in increments of 1 line of the sync source.
Sets the controls for Metadata.
Sets the behaviour of the DB-9 Metadata I/O.
Revision 1.2