Table of Contents
Advertisement
The power supply for the anti-condensation heating, for example, must be provided externally.
The terminal assignment is provided in the circuit diagram of the drive.
3.8.46
CSA mark (option U03)
With this option, the drive is supplied with a CSA test mark, i.e. it has been certified according
to the Canadian Standards Association (CSA). The drive conforms to the "CSA C22.2 No.
274-13 - Adjustable Speed Drives" standard.
3.8.47
CE conformance (option U02)
With this option, the converter is delivered with CE conformity mark.
3.8.48
Cell bypass (Option U11)
The power cell can be equipped with a bypass switch to increase the availability of the drive
system. The internal electronics automatically detects a defective power cell. The bypass
switch is activated without any interruption. As a consequence, even when a fault occurs, you
can continue to operate the drive without any interruption. You can replace the defective power
cell at the next maintenance interval.
See also
Replacing a power cell (Page 110)
3.8.49
Customer-specific version (option X30)
The device was ordered with option X30 for a customer-specific version. More information is
provided in Technical Data. The information there supersedes the corresponding contents of
the operating instructions. Please read and follow this information carefully.
3.9
Interfaces
3.9.1
DRIVE-CLiQ interface
Table 3-3
Pin
1
2
SINAMICS PERFECT HARMONY GH150 6SL3826
Operating Instructions 05/2020
DRIVE-CLiQ interface
Signal name
TXP
TXN
Description
3.9 Interfaces
Technical data
Transmit data +
Transmit data -
55
Advertisement
Table of Contents
