Intel 8XC196MC User Manual page 259

8XC196MC, MD, MH USER'S MANUAL
EPA x _CON (Continued)
x = 0–1 (8XC196MH)
x = 0–3 (8XC196MC)
x = 0–5 (8XC196MD)
The EPA control (EPA x _CON) registers control the functions of their assigned capture/compare
channels.
7
x = 0, 2, 4 TB
7
x = 1, 3, 5 TB
Bit Bit
Number Mnemonic
3 RE
2 WGR
AD
Figure 11-10. EPA Control (EPA x _CON) Registers (Continued)
11-20
CE M1 M0
CE M1 M0
Re-enable
Re-enable applies to the compare mode only. It allows a compare event
to continue to execute each time the event-time register (EPA x _TIME)
matches the reference timer rather than only upon the first time match.
0 = compare function is disabled after a single event
1 = compare function always enabled
Waveform Generator Reload; A/D Conversion
The function of this bit depends on the EPA channel.
For EPA capture/compare channels 0, 2, 4:
The WGR bit allows you to use the EPA activities to cause the reload
of new values in the waveform generator.
0 = no action
1 = enables waveform generator reload
For EPA capture/compare channels 1, 3, 5:
The AD bit allows you to use the EPA activities to start an A/D
conversion that has been previously set up in the A/D control
registers.
0 = causes no A/D action
1 = starts an A/D conversion on an output compare
Get other manuals https://www.bkmanuals.com
Address: See Table 11-3 on page 11-3
Reset State:
RE WGR
RE AD
Function
00H
0
ROT ON/RT
0
ROT ON/RT