Regulation Switches; Two-Line Output Display Screen - Advanced Energy Pinnacle User Manual

Pinnacle™ 20 kW

Regulation Switches

Use these switches to select the method of output regulation when the control panel
has control.
POWER
CURRENT
VOLTAGE

Two-Line Output Display Screen

The display screen displays two lines of information. When you first power up, the
display screen appears.
Unit Configuration Field
The following information appears in the top line of the display (left to right):
• Voltage readback (in volts)
• Current readback (in amps)
• Power readback (in watts)
• Setpoint source (int = internal, ext = external)
• Setpoint
The following information appears in the bottom line of the display (left to right):
• Unit Configuration Field
4 M/S/L: M = Master, S = Slave, or L = Limited duty cycle
4 J: Joule mode enabled
4 L: Target life counter enabled
5702156-E
Specifies that the method of output regulation is power.
Specifies that the method of output regulation is current.
Specifies that the method of output regulation is voltage.
Readbacks
I/O Communication and Control
Source
Setpoint
Warning Field Clock I.D.
Setpoint
Clock
1554
4-19