Quick Stroke Adjustment Via Knee Button - Dürkopp Adler 868-M Operating Instructions Manual

60

4.11.3 Quick stroke adjustment via knee button

The increased sewing foot stroke can be activated using the knee
lever (2).
The toggle switch (1) on the rear side of the knee button (2)
determines whether the increased sewing foot stroke is switched
on permanently or only while the knee button (2) is pressed.
Fig. 38: Quick stroke adjustment via knee button
①
②
(1) - Toggle switch
Position Function
0 Push-to-run
mode
1 Hold-to-run
mode
Information
The knee button (2) can also be assigned functions other than the
activation of the sewing foot stroke in push-to-run and hold-to-run
mode ( p. 87).
(2) - Knee button
Description
• To activate the sewing foot stroke:
Press the knee button once.
To deactivate the sewing foot stroke:
Press the knee button one more time.
The sewing foot stroke remains activated
for as long as you hold down the knee
button.
Operating Instructions 868-M - 01.0 - 12/2020
Operation