Function Of The Thread's Supplementary Tension In Relation To The Stroke Adjustment And The Speedomat; Opening The Thread Tension - Dürkopp Adler 868 Instruction Manual

6.2.3 Function of the thread's supplementary tension in relation to the stroke adjustment
and the Speedomat
6.3

Opening the thread tension

Only Efka DC 1550 DA 321G
The thread's supplementary tension can, at any time, be switched on
and off by actuating the key 1 (see chapter 6.17) of the machine's
keypad. To that end, the parameter F-255 must be set to "7".
Parameter stroke adjustment max.
Setting via knee switch
F-197 = 0
F-197 = 1
F-197 = 2
F-197 = 3
(*) If the stroke adjustment (max. via knee switch is switched on and
the HP-speed of parameter F-117 is reached through the
"Speedomat", the thread's supplementary tension will be switched on
automatically.
0 = Thread's supplementary tension closed mechanically
1 = Thread's supplementary tension opened mechanically
·
If the thread's supplementary tension is closed, the condition will
be maintained when adjusting the stroke.
·
When the machine is switched off, the last setting of the thread's
supplementary tension will be maintained through the mains
connection.
Basic control box setting for the automatic steps of the
stitch-number-reduction (Speedomat) through the setting wheel for
the height of the alternating transport stroke
Parameter 188
Step 01-21
Step 01-10
Step 11-18
of
Step 19-21
Subclasses
868-190020, 868-290020
When lifting the sewing feet with the knee switch, main and
supplementary tension are automatically opened.
Subclasses
868-190322, 868-290322, 0868-390322
The thread tension is automatically opened when trimming the thread.
Reaching of the HP-speed
1
0
1 (*)
0
total Speedomat range
max. allowed number of stitches. parameter
-1
F-111 = 2,500min
linear stepwise reduction of the max. number
stitches (Speedomat)
max. allowed number of stitches, parameter
-1
F-117 = 1,600 min
stroke adjustments
setting wheel
of parameter F-117
(Speedomat)
1
1
0
0
17