Christie CP2420-Xe Service Manual page 65

6. Loosen the pivot screw in the center of the lens mount.
7. Remove the lens mount from the projector head and carefully set it aside.
8. To re-install, follow these steps in reverse order.
Make sure the springs are kept on the mounting screws when installing.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Lens mount components
65