4. Loosen the remaining three screws from the tabs and swing them away.
5. Remove the UV filter.
6. To re-install, follow these steps in reverse order.
When installing, notice the arrow marking on the side of the UV filter. This indicates which side
of the filter should face the lamp.
7. Perform LampLOC
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
™
alignment (on page 21).
Lamp compartment
87