Security Roles; Technical Support - Christie CP2420-Xe Service Manual

ID Component
H LED status indicators
(x2)
I Light engine air filter
cover
J Communication panel
cover
K LVPS/LPS access panel
L Adjustable feet (x4)
M Security locks
N Lamp door
O Left access cover

Security roles

Only Christie authorized service technicians should perform field repair, marriage setup, and service to
the unit.
Theater personnel should only perform diagnostic functions, such as running the projector
interrogator. After performing a procedure mandating the use of the high-security key, theater
personnel must ensure the security of the system is reestablished.

Technical support

Technical support for Christie Cinema products is available at:
• Support.cinema@christiedigital.com
• +1-877-334-4267
• Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Provide information about the status of the projector.
Provides access to the air filter, which removes particles from the intake air
before it circulates in the front compartment to cool the main electronics.
Provides access to Input connections.
Provides access to the lamp power supply (LPS) connections, AC relay, and
LVPS.
Adjust the tilt of the projector.
Prevent unauthorized access to projector components.
Provides access to the lamp. The lamp door must remain closed and locked for
normal operation. Lamp replacement must be performed only by qualified
technicians.
Provides access to the air filter.
Introduction
9