Christie CP2420-Xe Service Manual page 73

3. Remove the left front cover.
4. Disconnect the two quick disconnect hoses: one from the radiator and one from the light
engine closest to the front of the projector.
5. Disconnect the inline harness connector (RAD FAN 24).
6. Unroute the harness from the clips.
7. Loosen four screws securing the radiator (on the left side).
8. Transfer the four screws to the new radiator prior to reinstalling.
9. Remove the radiator and replace it, if required.
10. To re-install, follow these steps in reverse order.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Ventilation and cooling
73