Christie CP2420-Xe Service Manual page 106

5. Remove the two screws securing the yellow notch filter to the IOS.
Loosen the center nut, if necessary.
6. Carefully, pull the yellow notch filter out of the IOS.
7. To re-install, follow these steps in reverse order.
8. Calibrate the green primary and MCGD.
CP2420-Xe and CP4420-Xe Service Guide
020-103566-02 Rev. 1 (07-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
106